Are Jeep Wrangler Parts Expensive? (The Full List)

Jeep Wrangler needs no introduction when it comes to off-roading. It has been a popular choice among car enthusiasts. Wrangler is widely considered as the most reliable and durable model in the entire Jeep Lineup.

Despite Wrangler’s excellent durability and ability to storm through any rough train people are often skeptical about its maintenance costs. One of the frequently asked is that “Are Jeep Wrangler parts expensive?” In this article, you will get to know everything about the pricing of Jeep Wrangler parts.

Are Jeep Wrangler Parts Expensive?

Jeep Wranglers parts aren’t that expensive when compared to the other SUV brands of similar category. They are readily available all across the world and also there is a huge supply of Wrangler aftermarket parts with equal if not better quality.

The exact price depends upon the specific part and year of the Wrangler, but in general, the price is in the average range. Jeep Wranglers are not very expensive to maintain, and the average maintenance cost is $694, just $100 more than similar SUVs.

Still, if you feel that its OEM parts are expensive then remember there are plenty of aftermarket and second-hand parts available in the market at an affordable price.

Also read: Does Jeep Hold its Value: 6 Models Compared

Brake Pads

Brake pads on Jeep Wrangler need replacement after every 30 to 60 thousand miles, depending upon your driving style and the area in which you live. The replacement cost of brake pads is $220 to $300 per axle.

Brake pads are used to slow down or stop your vehicle. If you mostly drive through heavy traffic or use brakes more often, then this replacement can even come before 30k miles.

The labor cost for replacing the brake pads on Wrangler is around $80 to $90 and you can also save this money by doing the replacement yourself.

Filters

Like any other SUV, Jeep Wrangler also comes with four different types of filters namely cabin filter, oil filter, fuel filter, and air filter. A common function of all these filters is to ensure a smooth and pure flow of fluids.

Now, let’s quickly discuss their cost and expected lifespan:

• Cabin Filters: It costs around $90 to replace the cabin filters on Jeep Wrangler. They purify and clean the air entering into the vehicle through its heating and ventilation systems. In normal conditions, they can last up to 30k miles but in extreme conditions, cabin filters need replacement after every 10k miles.
  
• Air Filters: Also known as the engine air filters, their primary job is to prevent dirt and impurities from reaching the combustion chamber. A new air filter will cost around $35 and almost the same will be charged by the mechanic in terms of labor costs. Similar to the cabin filters they also need to be replaced after every 15k to 30k miles.
  
• Oil Filter: It removes dust and metallic particles from the engine oil. The oil filter is usually replaced along with the engine oil. It is priced at a little over $15 and this cost is usually included in the oil replacement costs.
  
• Fuel Filter: Fuel filter does the same job as the oil filter but here the fluid is gasoline or diesel instead of the engine oil. For Jeep Wrangler, the total cost of fuel filter replacement is $240 to $280. The latest models need fuel filter replacement after 50k miles whereas the older versions need replacement after every 30k miles.

Battery

A new battery for Jeep Wrangler will cost $160 to $200 and this replacement can also be performed at home. Otherwise, you can expect to pay $40 in terms of labor costs.

The battery provides power to all the electrical components of the car and also acts as a voltage regulator. A battery of Jeep Wrangler has an average lifespan of 5 years and some latest batteries can even last longer. For other cars in the same category, the price of a new battery varies from $100 to $200.

Also read: 6 Best Jeeps with a Panoramic Sunroof (+Photos)

Timing Belt

The new timing belt for Jeep Wrangler will cost $500 and the labor cost will be around $380. The replacement requires the opening of several other parts, and only an experienced person can perform this operation.

The timing belt of the Jeep Wrangler usually lasts from 60k to 100k miles. If completely broken it can also cause damage to other parts of the engine and consequently the repair cost can go up to $2000.

For other car brands, the exact cost of timing belt replacement depends upon the type and complexity of the engine. It can cost anywhere from $400 to $1500 including the labor and parts costs.

Trending Video: How to Easily Bring Back to Life any Old Car Battery and Save Tons of Money (click to watch)

Starter and Alternator

The starter of Jeep Wrangler needs replacement after 100k to 150k miles and a new one will cost around $350. To save some money, you can also buy an aftermarket starter instead of the OEM.

The labor cost of this replacement will be $80 to $100 and with the right set of tools, you can also perform this operation yourself. Starters of other car brands are priced from $150 to $350.

In case you are wondering about its use, a starter is used to rotate the crankshaft of the engine until it starts rotating by the engine’s power.

Now coming to the alternator, it needs replacement after every 100k miles or seven years. A new alternator for Jeep Wrangler will cost $450 to $550 and the labor cost will be around $80.

An alternator works as a generator and converts the mechanical energy of the engine into electrical energy. While performing this conversion it also charges the car’s battery. Excluding the labor costs, alternators for similar car brands will cost $300to $600.

Spark Plugs

The spark plug of a Jeep Wrangler will cost around $170 excluding the labor costs. It usually needs replacement after every 100k miles.

As it is obvious by the name, a spark plug generates the spark that ignites the fuel inside the combustion chamber. It does it by passing a current of very voltage between two points. You can also replace the spark plug of your Wrangler by yourself.

By doing so, you can save around $70 on the labor costs. Sparks plugs for Jeep Wrangler are relatively more expensive than the other car brands, and this difference is around $50 per spark plug.

Fuel Pump

The fuel pump of the Jeep Wrangler can last up to its entire lifespan but it is recommended that you should replace it after every 150k miles. The total of this replacement cost will be $600 to $750.

The fuel pump delivers the fuel from the fuel tank to the carburetor or combustion chamber of the engine. As discussed before, a fuel filter is also placed in the passage. The labor cost of this operation is around $200 and because of the danger involved one should avoid doing it by himself.

Also read: Are Jeeps Good Cars? 14 Things You Need to Know

Water Pump

For Jeep Wrangler, a new water pump will cost $350 to $400. The cost is a little higher compared to other car brands but in order to save some money, you can also use an aftermarket water pump if it is of good quality.

It is used to circulate the coolant from the radiator to the engine, coolant system, and then back to the radiator. By doing so it maintains the temperature of the engine within the desire limits.

The water pump of the Jeep Wrangler typically needs replacement after every 100k miles. If you have some relevant experience you can also perform this operation by yourself. Otherwise, a mechanic is expected to charge you $150 for this job.

Lights

Jeep Wrangler uses LED lights in the latest models and a LED bulb usually lasts up to 10,000 hours. They are very easy to replace and the total cost is around $90 per bulb.

Lights are used to see the roadway during the dark and they are also used to communicate with other drivers on the road. Initial versions of Jeep Wrangler used to have incandescent bulbs which were less reliable and often need replacements.

The part cost of a new LED bulb for Jeep Wrangler is $35 to $45 and the labor cost is almost the same. LED bulbs of other car brands have also a similar price tag. But in case the whole headlight assembly of Wrangler needs to be replaced, then it will cost anywhere from $300 to $800.

Oil

Jeep Wrangler needs oil replacement after every 5,000 miles. An oil change of Wrangler will cost you around $110 including the labor and parts costs.

Engine oil provides lubrication for engine parts and reduces wear and tears in them. The oil filter is also replaced in this operation and its cost is included in the replacement cost. You can also change the engine oil by yourself at home.

The latest version of Wrangler uses synthetic oil which can last up to 10,000 miles. The replacement cost for synthetic oil will be $30 to $40 higher than the normal oil.

Tires

Tires on Jeep Wrangler usually last from 30k to 50k miles. But in case of frequent off-roading, they might need replacement after 15 to 20k miles. A single tire of Jeep Wrangler will cost you $250 to $320.

Tires transfer the engine’s power to the road surface. They are also used to absorb shock and change the direction of the car. The labor cost of a single tire replacement is around $70 and if the rim is already installed then you can easily replace it by yourself.

High-performance tires are even more expensive, and a pair of such tires for Jeep Wrangler will cost you more than one thousand dollars.

Wiper Blades

Wiper blades of Jeep Wrangler aren’t that expensive and are priced at $25 to $40. The labor cost will be around $15.

Wiper blades are used to remove rain, snow, and dirt from the car’s windscreen. They can be easily replaced and you can also perform this replacement by yourself.

References:

jeepkingdom.com, cartreatments.com, carcaretotal.com, fourwheeltrends.com, kevinsjeepparts.com, getjerry.com, jeepmodified.com, onecarspot.com, survivaltechshop.com, offroadable.com